25
Proof Sign-off:
<M.Takata> _______
<K.Nishi> _______
<K.Pipa> _______
<Flamingo>
Rev. C
A6 size Qr.fm
11/5/98 Pass 0
R
Status and Error Messages
Reset All
All printer settings have been reset to the user default
configuration, or the last settings that were saved.
Reset to Save
You have changed the SelecType setting but the new
setting is not activated immediately after exiting
SelecType. To activate the new setting, do one of the
following: (1) exit SelecType by pressing
Continue
or
On Line
(the new setting is activated after the current
print job is finished), or (2) reset the printer by pressing
ALT
and
Reset
at the same time.
RAM Check
The printer is checking the RAM.
ROM Check
The printer is checking the ROM.
Self Test
The printer is performing a quick internal check.
To Next Page
Loading...
