Epson EPL-N4000 - P...; R...

24
<Flamingo>
Rev. C
A6 size Qr.fm
11/5/98 Pass 0
L
Proof Sign-off:
<M.Takata> _______
<K.Nishi> _______
<K.Pipa> _______
Paper Out xxx yyy
There is no paper in the specified paper source (xxx).
Load paper of the indicated size (yyy) into the paper
source. See “Basic Printing Operations” on page 1-4 of
your
Reference Guide
or “Using the Options” on page
3-57 of your
Reference Guide
for instructions on loading
paper.
Paper Set xxx yyy
The paper loaded in the paper source (xxx) does not
match the required paper size (yyy). Replace the paper
with the correct size of paper and press
Continue
.
Print Overrun
The time required to process data exceeds the print
engine speed because the volume of data is too great.
Press
Continue
to resume printing. If this message
appears again, change the Page Protect setting in
SelecType Config Menu.
Ready
The printer is ready to receive data and print.
Reset
The printer’s current interface has been reset and the
buffer is cleared. However, other interfaces are still
active and retain their settings and data.