Epson ET-M2120 Series - Page 124

❏ Example of connecting to dierent SSIDs
❏ Example of connecting to SSIDs with a dierent frequency range
A privacy separator on the wireless router is available.
Solutions
Most wireless routers have a privacy separator feature that blocks communication between connected
devices. If you cannot communicate between the printer and the computer or smart device even if they
are connected to the same network, disable the privacy separator on the wireless router. See the manual
provided with the wireless router for details.
The IP address is incorrectly assigned.
Solutions
If the IP address assigned to the printer is 169.254.XXX.XXX, and the subnet mask is 255.255.0.0, the IP
address may not be assigned correctly.
Print the network connection report, and then check the IP address and the subnet mask assigned to the
printer.
Restart the wireless router or reset the network settings for the printer.
& “Printing a Network Connection Report” on page 194
& “Re-setting the Network Connection” on page 176
Solving Problems > The Printer Does Not Work as Expected > Cannot Print
124