Epson ET-M2120 Series - Improving Print, Copy, and Scan Quality

Improving Print, Copy, and Scan Quality
Checking and Cleaning the Print Head
If the nozzles are clogged, the printouts become faint or there is visible banding. If the nozzles are severely clogged,
a blank sheet will be printed. When print quality has declined, rst use the nozzle check feature to check if the
nozzles are clogged. If the nozzles are clogged, clean the print head.
c
Important:
❏ Do not open the scanner unit or turn o the printer during head cleaning. If the head cleaning is incomplete, you
may not be able to print.
❏ Head cleaning consumes ink and should not be performed more than necessary.
❏ When ink is low, you may not be able to clean the print head.
❏ If print quality has not improved aer repeating nozzle check and head cleaning 3 times, wait for at least 6 hours
without printing, and then run the nozzle check again and repeat the head cleaning if necessary. We recommend
turning o the printer by using the
P button. If print quality has still not improved, run Power Cleaning.
❏ To prevent the print head from drying out, do not unplug the printer while the power is on.
Checking and Cleaning the Print Head (Control Panel)
1.
Load A4-size plain paper in the printer.
“Loading Paper in the Paper Cassette” on page 26
2.
Select Maintenance on the home screen.
To select an item, use the
u d l r buttons, and then press the OK button.
3.
Select Nozzle Check.
4.
Follow the on-screen instructions to print the nozzle check pattern.
5.
Check the printed pattern to see if the print head nozzles are clogged.
❏ A:
All lines are printed. No further steps are needed.
Maintaining the Printer > Improving Print, Copy, and Scan Quality > Checking and Cleaning the Print Head
97