Epson ET-M2120 Series - Printer Setup

Power Cleaning:
Select this feature to power cleaning to clean the clogged nozzles in the print head. More ink is
consumed than in usual cleaning. See the "Related Information" below for details on using this
feature.
Print Head Alignment:
Select this feature to adjust the print head to improve print quality.
❏ Vertical Alignment
Select this feature if your printouts look blurry or text and lines are misaligned.
❏ Horizontal Alignment
Select this feature if horizontal banding appears at regular intervals in your printouts.
Fill Ink:
Select this feature to reset the ink level to 100% when lling the ink tank.
Set Ink Level:
Select this feature to set the ink level according to the actual ink remaining.
Paper Guide Cleaning:
Select this feature if there are ink stains on the internal rollers. e printer feeds paper to clean the
internal rollers.
Related Information
& “Checking and Cleaning the Print Head” on page 97
& “Running Power Cleaning” on page 99
& “Aligning the Print Head” on page 101
& “Relling the Ink Tank” on page 154
& “Cleaning the Paper Path for Ink Smears” on page 101
Printer Setup
Select the menus on the control panel as described below.
Settings > Printer Setup
Paper Source Settings:
Paper Setting:
Select the paper size and paper type you loaded in the paper source.
A4/Letter Auto Switching:
Select On to feed paper from the paper source set as A4 size when there is no paper source set
as Letter, or feed from the paper source set as Letter size when there is no paper source set as
A4.
Product Information > Settings Menu List > Printer Setup
215