Epson ET-M2120 Series - It is Time to Refill the Ink

Preventing Paper Jams
Check the following if paper jams occur frequently.
❏ Place the printer on a at surface and operate in the recommended environmental conditions.
“Environmental Specications” on page 225
❏ Use the paper supported by this printer.
“Available Paper and Capacities” on page 202
❏ Follow paper handling precautions.
“Paper Handling Precautions” on page 24
❏ Load paper in the correct direction, and slide the edge guide against the edge of the paper.
“Loading Paper in the Paper Cassette” on page 26
❏ Do not load more than the maximum number of sheets
specied
for paper.
❏ Load one sheet of paper at a time if you have loaded several sheets of paper.
❏ Make sure the paper size and paper type settings match the actual paper size and paper type loaded in the
printer.
“List of Paper Types” on page 25
❏ Clean the roller inside the printer.
“Improving Paper Feeding Problems” on page 95
It is Time to Rell the Ink
Ink Bottle Handling Precautions
Read the following instructions before relling ink.
Storing precautions for ink
❏ Store ink bottles at normal room temperature and keep them away from direct sunlight.
❏ Do not store the ink bottles in high or freezing temperatures.
❏ Epson recommends using the ink bottle before the date printed on the package.
❏ When storing or transporting an ink bottle, do not tilt the bottle and do not subject it to impacts or temperature
changes. Otherwise, ink may leak even if the cap on the ink bottle is tightened securely. Be sure to keep the ink
bottle upright when tightening the cap, and take precautions to prevent ink from leaking when transporting the
bottle, for example, putting the bottle in a bag.
❏ Aer bringing an ink bottle inside from a cold storage site, allow it to warm up at room temperature for at least
three hours before using it.
❏ Do not open the ink bottle package until you are ready to ll the ink tank. e ink bottle is vacuum packed to
maintain its reliability. If you leave an ink bottle unpacked for a long time before using it, normal printing may
not be possible.
❏ Once you open an ink bottle, we recommend using it as soon as possible.
Solving Problems > It is Time to Rell the Ink > Ink Bottle Handling Precautions
153