Epson ET-M2120 Series - Software for Making Settings

Starting on Mac OS
Select Go > Applications > Epson Soware > Event Manager.
Software for Making Settings
Application for
Conguring
Printer Operations (Web
Cong
)
Web
Cong
is an application that runs in a web browser, such as Internet Explorer and Safari, on a computer or
smart device. You can conrm the printer status or change the network service and printer settings. To use the
Web Cong, connect the printer and the computer or device to the same network.
e following browsers are supported.
Microso Edge, Internet Explorer 8 or later, Firefox
*
, Chrome
*
, Safari
*
*Use the latest version.
Running Web Cong on a Web Browser
1.
Check the printer's IP address.
Select Settings > Network Settings > Connection Check from the control panel. Press the
x button or the
OK button to print the network connection report. Check the printer's IP address on the printed network
connection report.
2.
Launch a Web browser from a computer or smart device, and then enter the printer's IP address.
Format:
IPv4: http://the printer's IP address/
IPv6: http://[the printer's IP address]/
Examples:
IPv4: http://192.168.100.201/
IPv6: http://[2001:db8::1000:1]/
Note:
Using the smart device, you can also run Web Cong from the maintenance screen of Epson iPrint.
Since the printer uses a self-signed certicate when accessing HTTPS, a warning is displayed on the browser
when you start Web Cong; this does not indicate a problem and can be safely ignored.
Related Information
& “Application for Printing Easily from a Smart Device (Epson iPrint)” on page 208
& “Printing a Network Connection Report” on page 194
Running Web Cong on Windows
When connecting a computer to the printer using WSD, follow the steps below to run Web Cong.
Product Information > Software Information > Software for Making Settings
212