Epson ET-M2120 Series - Product Specifications

Settings > Restore Default Settings
Resets the following menus to their defaults.
❏ Network Settings
❏ Copy Settings
❏ Scan Settings
❏ Clear All Data and Settings
Firmware Update
Select the menus on the control panel as described below.
Settings > Firmware Update
Update:
Check if the latest version of the rmware has been uploaded to the network server. e rmware is
updated when new rmware is found. Once the update has started, it cannot be interrupted.
Current Version:
Displays the current rmware version of your printer.
Notication:
Select On to receive a notication if a rmware update is available.
Related Information
& “Updating the Printer's Firmware using the Control Panel” on page 112
Product Specications
Printer
Specications
Print Head Nozzle Placement Black ink nozzles: 180×2 rows
Weight of Paper
*
Plain Paper 64 to 90 g/m(17 to 24lb)
Envelopes Envelope #10, DL, C6: 75 to 90 g/m (20 to 24 lb)
* Even when the paper thickness is within this range, the paper may not feed in the printer or the print quality may decline
depending on the paper properties or quality.
Product Information > Product Specications > Printer Specications
220