Note:
If any ink remains in the ink bottle, tighten the cap and store the bottle upright for later use.
11.
Close the ink tank cap.
12.
Press the
x
button, and then follow the on-screen instructions to set the ink level.
Note:
Even if you do not rell ink up to the upper line on the ink tank, you can continue using the printer. To keep your
printer operating at its best, however, ll ink tank up to the upper line and reset the ink level immediately.
13.
Close the scanner unit.
Related Information
& “Ink Bottle Codes” on page 204
& “Ink Bottle Handling Precautions” on page 153
& “Cleaning Spilled ink” on page 105
Solving Problems
>
It is Time to Rell the Ink
>
Relling the Ink Tank
158
To Next Page
Loading...
