Printing a Booklet
You can also print a booklet that can be created by re-ordering the pages and folding the printout.
Note:
❏ If you do not use paper that is suitable for 2-sided printing, the print quality may decline and paper jams may occur.
“Paper for 2-Sided Printing” on page 203
❏ Depending on the paper and the data, ink may bleed through to the other side of the paper.
❏ If EPSON Status Monitor 3 is disabled, access the printer driver window, click Extended Settings on the Maintenance
tab, and then select Enable EPSON Status Monitor 3.
❏ However, it may not be available when the printer is accessed over a network or is used as a shared printer.
1.
Load paper in the printer .
“Loading Paper in the Paper Cassette” on page 26
2.
Open the le you want to print.
3.
Select Print or Print Setup from the File menu.
4.
Select your printer.
5.
Select Preferences or Properties to access the printer driver window.
6.
Select the method of 2-Sided Printing on the Main tab.
7.
On the printer driver's Settings tab, select Booklet.
8.
Click OK.
❏ Center Binding: Use this method when printing a small number of pages that can be stacked and easily
folded in half.
❏ Side Binding. Use this method when printing one sheet (four pages) at a time, folding each in half, and then
putting them together in one volume.
9.
Set the other items on the Main and More Options tabs as necessary, and then click OK.
“Main Tab” on page 36
Printing
>
Printing Documents
>
Printing from a Computer - Windows
42
To Next Page
Loading...
