Setting Up the Scanner 15
English
Connecting the scanner using the USB interface
cable
Note:
The USB 2.0 Hi-speed connection is not supported by Windows 98,
Windows Me, and Mac OS 9.
Connect one end of the supplied USB interface cable to the USB
port on the back of the scanner, and the other end to an USB hub
or the USB port on your computer.
Note:
❏ For USB 2.0 Hi-speed connection, make sure USB 2.0 Host Driver
by Microsoft is installed on your computer.
❏ If you connect your scanner through more than one hub, your
system may not work properly. In this case, try connecting the
scanner directly to the computer’s USB port. Also, your system may
not work properly if you use an USB interface cable other than the
one supplied by Epson.
USB interface
connector
To Next Page
Loading...
