Epson Expression 800 - Accessing Silverfast Lite

Accessing SilverFast Lite Page 11
Accessing SilverFast Lite
Follow the steps in this section to start SilverFast Lite from your
application software. The steps may vary, depending on your application.
1 Make sure you’ve set up and turned on the scanner. Then place the
document you want to scan on the document table. See
Setting Up
and Using Your Scanner for instructions.
2 Start your application software by selecting the program icon in its
program folder.
3 Select the scanner source. Choose Import, Acquire, or Select
Source from the File menu, and then select either Select TWAIN_32
Source (Windows
®
) or TWAIN Select (Macintosh
®
).
4 You see the Select Source dialog box. Select Expression 800 (32 Bit)
(Windows) or Expression800 (Macintosh) and click Select or OK.
Make sure you turn
on your scanner
before starting your
application; otherwise
the software may not
work properly.
The steps in this
section cover
scanning with
common
TWAIN-compliant
applications; other
applications use
different scanning
steps. See your
application’s
documentation for
additional details on
scanning.
Click to select
the scanner
source
Click to select SilverFast Lite