Basic Scanning Page 15
Basic Scanning Steps
1 Access the SilverFast Lite window as described in Accessing
SilverFast Lite.
2 Preview the image by clicking the Prescan button. Because the
prescan image reflects what the scanned image will look like, it
changes as you change certain settings.
3 Select the appropriate basic settings for the original you are scanning
as described in Changing the Basic Settings
.
4 Select the portion of the image to be scanned.
To scan the entire original, click and drag the frame border (dotted line)
to the edge of the prescanned image. To scan only a part of an image,
click and drag the frame border to define the part of the image you
want to scan. SilverFast Lite scans only the area within the frame.
For details on framing your image, including using multiple frames, see
Framing
.
5 Select the output size for your scanned image as described in Sizing
the Image.
Cropping an image
makes the scanned
file size smaller; the
file is then faster to
process and takes up
less storage space on
your hard drive.
frame border
To Next Page
Loading...
