Advanced Scanning Page 35
Changing Image Orientation
If you placed an image on the scanner document table incorrectly, you
can rotate the image using SilverFast Lite instead of moving the original
on the scanner. You can also flip an image either horizontally or vertically.
To do this, you use the image orientation tools and the image orientation
display.
To change the image orientation, do the following:
◗ Click the toggle button to switch to Orientation view. The entire
image or frame appears in the image orientation display and the toggle
button changes to .
◗ To rotate the image, click the rotate button until the desired rotation
is displayed.
◗ To flip the image, click the horizontal or vertical button.
Changes in image
orientation are shown
in the orientation
display, not in the
preview image.
flip image vertically
rotate image clockwise 90°
toggle between Pixel Zoom/Orientation view
flip image horizontally
Pixel Zoom displays a magnified (4X) view of the preview image at the
position currently marked by the cursor in the preview image
Orientation view shows the orientation of the active frame
image orientation
display
To Next Page
Loading...
