Basic Scanning Page 17
Changing the Basic Settings
Prescanning lets you preview the image to see how it will look when
scanned. If any adjustments are needed, change one or more of the basic
settings described in these sections to obtain the results you want:
◗ Selecting a Scan Mode
◗ Choosing the Original Document Type
◗ Selecting the Scan Type
◗ Choosing the Scan Resolution
Selectin
a Scan Mode
The Scan Mode indicates if you’re scanning one image or frame or
multiple images or frames. Select one of the following:
Normal Scans a single image or frame into your
application. This is the default mode.
Batch Mode Scans several individual images or frames
sequentially and imports them into your
application.
Batch Mode Tiff Scans several individual images or frames
sequentially and saves them directly to a TIFF file
on your hard disk instead of importing them into
your application.
For more information on the batch modes, see Batch Scanning
.
For a description of
the Filter setting, see
Applying Scanning
Filters.
To Next Page
Loading...
