Basic Scanning Page 18
Choosing the Original Document Type
Select the type of image medium you’re scanning as the Original setting.
Choose one of the following:
Reflective A reflective original (such as a printed photograph)
needs to be captured by light reflecting off the
original and back into the scanner. Select this
option for originals you’re scanning on the
document table using the document cover.
Pos. Transparency When you’re scanning positive transparent
originals (such as 35 mm slides) using the optional
transparency unit, select this option so light can
shine through the original instead of reflecting off
it. See Scanning Transparencies
for instructions.
Neg. Transparency When you’re scanning negative transparent
originals (such as negative film strips) using the
optional transparency unit, select this option so
light can shine through the original instead of
reflecting off it. SilverFast Lite also turns the
negative image into a positive image. See
Scanning Transparencies
for instructions.
35 mm Same as Neg. Transparency, described above.
You can’t use
SilverFast Lite with
the optional auto
document feeder;
use EPSON TWAIN
Pro instead. See the
electronic
EPSON
TWAIN Pro User’s
Guide
for instructions.
To Next Page
Loading...
