Advanced Scanning Page 40
Scanning Polaroid Photographs
SilverFast Lite provides two options for scanning polaroids: Spectra
Polaroid and 600 Polaroid. Both automatically frame the photograph for
the correct size (4 × 3.5-inch or 3.5 × 3.5-inch) and customize the
exposure adjustments. This optimizes the image quality unique to
Polaroid photographs, due to the instant development process used to
create them.
Follow these steps to scan Polaroid photographs:
1 Place the Polaroid on the scanner’s document table with the upper
right corner of the photo aligned with the upper right corner of the
document glass.
2 Access the SilverFast Lite window as described in Accessing
SilverFast Lite.
3 Return all settings to their defaults by holding down the Shift key and
clicking the Reset button; the button changes to Reset All and resets
all your settings.
4 Change the Original setting to Spectra Polaroid or 600 Polaroid.
5 Set the Scan Mode and Scan Type settings as described in Selecting a
Scan Mode and Selecting the Scan Type.
for Spectra Polaroids
for 600 Polaroids
To Next Page
Loading...
