Basic Scanning Page 33
3 Click and drag the frame to resize the original frame area.
Resizing by Manually Entering Output Dimensions
To resize an image by typing in the dimensions:
1 Select the active frame you want, if there’s more than one frame in
your prescan image.
2 Make sure that the proportional scaling bracket is locked to
automatically maintain the image’s width-to-height ratio. (If it’s not,
click on it to lock it.) For details, see Maintaining Size Ratio
(Proportional Scaling).
3 Type the new height or width measurements in one of the Output
fields. The other values are adjusted as necessary to maintain your
image proportions.
Resizing by Manually Entering a Scale Percentage
To resize an image by typing in a scale (magnification) percentage:
1 Click on a frame if there’s more than one displayed.
2 Make sure the proportional scaling bracket is locked to automatically
maintain the image’s height-to-width ratio. (Just click on it to lock it.)
3 Type a new height and/or width scale factor.
A number greater than 100% increases the image output size from the
original size. A number less than 100% decreases the image output
size from the original size.
width height
proportional scaling
bracket locked
scale percentage
To Next Page
Loading...
