Troubleshooting Page 61
You have trouble batch scanning.
You cannot scan images at all or only a few dots appear in the scanned image.
Problem Solution
Your application
program doesn’t
support batch scanning
or you don’t have
enough system
memory
Some applications don’t support batch scanning. When you try to batch
scan with this type of program, you get an error message or the system
locks up. Check the program documentation and, if necessary, use
another program for batch scanning.
You also may not have enough system memory for the batch scan. Try
reducing the document size, scanning fewer pages at once, or adding
more system memory.
Problem Solution
You may have selected
incorrect scan settings
Select different SilverFast Lite settings. You may have selected an
incorrect Scan Type, or the Highlight/Shadow and Tone Curves settings
may be inappropriate for your image. See Changing the Basic Settings
and Adjusting Image Quality for details.
To Next Page
Loading...
