Troubleshooting Page 65
The printer can’t print the image, or the printout is garbled or isn’t an image.
Moiré (crosshatch) patterns appear in the scanned image.
Problem Solution
Your printer and
computer may not be
securely connected
Check that the printer is properly connected to the computer and is
correctly set up; see your printer manual.
Your software is not
installed correctly for
your printer
Check that your application software is properly installed and set up for
your printer; see your application software manual.
Problem Solution
You have scanned a
document with halftone
patterns
To minimize moiré patterns, try the following:
◗ Place a transparent sheet between the document and the document
table to unfocus the image slightly.
◗ Move or angle the document slightly.
◗ Change the output image size setting slightly.
To Next Page
Loading...
