The installation location is inappropriate.
Solutions
Place the printer on a at surface and operate in the recommended environmental conditions.
& “Environmental Specications” on page 159
Unsupported paper is being used.
Solutions
Use paper supported by this printer.
& “Available Paper and Capacities” on page 147
& “Unavailable Paper Types” on page 149
Paper handling is inappropriate.
Solutions
Follow paper handling precautions.
& “Paper Handling Precautions” on page 25
Too many sheets are loaded in the printer.
Solutions
Do not load more than the maximum number of sheets specied for the paper. For plain paper, do not
load above the line indicated by the triangle symbol on the edge guide.
& “Available Paper and Capacities” on page 147
Paper Feeds at a Slant
e following causes can be considered.
The paper is loaded incorrectly.
Solutions
Load paper in the correct direction, and slide the edge guide against the edge of the paper.
& “Loading Paper in the Rear Paper Feeder” on page 26
Several Sheets of Paper are Fed at a Time
e following causes can be considered.
The paper is moist or damp.
Solutions
Load new paper.
Solving Problems
>
Cannot Print or Scan
>
Paper Does Not Feed Properly
104
To Next Page
Loading...
