E
Remove all paper from the rear paper feed slot.
F
Close the rear paper feed slot cover, the output tray, the ADF input tray, and the ADF output tray extension.
Then lower the control panel to store.
G
Remove all paper from the paper cassette and re-insert the cassette into the product.
H
Repack the product in its box, using the protective materials that came with it.
c
Important:
When storing this product in a box, place it so that the control panel does not get damaged.
Note:
❏ Keep the product level during transport.
❏ Be sure to remove the protective materials from the product before using it again.
Checking and Installing Your Software
Checking the software installed on your computer
To use the functions described in this User’s Guide, you need to install the following software.
❏ Epson Driver and Utilities
❏ Epson Easy Photo Print
❏ Epson Print CD
User’s Guide
Maintaining Your Product and Software
135
To Next Page
Loading...
