Note:
❏ Fan and align the edges of the paper before loading.
❏ For plain paper, do not load paper above the line just under the
arrow mark inside the edge guide. For
Epson special media, make sure the number of sheets is less than the limit specified for the media.
& “Selecting Paper” on page 21
❏ When you select Cassette 1>Cassette 2 as the Paper Source, load the same size and type of paper in both
cassettes.
❏ When loading a Photo Stickers sheet, place it face down. Do not use the loading support sheet that came with the
Photo Stickers.
Use cassette 2 when loading envelopes. Load envelopes short edge first with the flap facing up and to the left.
Next, check that the envelopes are not sticking out from the end of the cassette.
User’s Guide
Paper and Media Handling
27
To Next Page
Loading...
