10 Safety Instructions
❏ Never disassemble, modify, or attempt to repair the AC
adapter, AC power cord, scanner, or scanner option by
yourself except as specifically explained in the scanner’s
guides.
❏ Do not insert objects into any opening as they may touch
dangerous voltage points or short out parts. Beware of
electrical shock hazards.
❏ Do not use aerosol products that contain flammable gases
inside or around this product. Doing so may cause fire.
❏ Unplug the scanner and the AC adapter, and refer servicing
to qualified service personnel under the following conditions:
The AC power cord or plug is damaged; liquid has entered
the scanner or the AC adapter; the scanner or the AC adapter
has been dropped or the case has been damaged; the scanner
or the AC adapter does not operate normally or exhibits a
distinct change in performance. (Do not adjust controls that
are not covered by the operating instructions.)
❏ Unplug the scanner and the AC adapter before cleaning.
Clean with a damp cloth only. Do not use liquid or aerosol
cleaners.
❏ If you are not going to use the scanner for a long period, be
sure to unplug the AC adapter from the electrical outlet.
❏ For Hong Kong and Singapore users:
Replace fuses only with fuses of the correct size and rating.
To Next Page
Loading...
Need help?
General
