102 Using the Scanner Features
8. Click the Preview button toward the bottom of the EPSON
Scan window. One of the following happens, depending on
how you loaded your original document:
❏ If you are using the document table, a preview of your
page is displayed in the Preview window.
❏ If you are using the ADF, it loads your first document
page, then EPSON Scan prescans it and displays it in the
Preview window. The ADF then ejects your first page.
Place your first document page on top of the rest of the
pages, then load the entire document (up to 50 pages) into
the ADF.
9. In the Preview window, draw a marquee (a line marking the
scan area) around the portion of your document page that you
want to scan, if necessary.
For instructions on creating and adjusting a marquee, see one
of the following sections:
❏ If you are scanning with the ADF, see "Adjusting the Scan
Area (Marquee)" on page 55.
❏ If you are scanning from the document table, see
"Adjusting the Scan Area (Marquee)" on page 87.
To Next Page
Loading...
