Troubleshooting 155
9
9
9
9
9
9
9
9
9
9
9
9
❏ Adjust the Auto Exposure setting in EPSON Scan’s Office or
Professional Mode window.
If you are scanning with the ADF, see "Adjusting the Color
and Other Image Settings" on page 58 for instructions.
If you are scanning from the document table, see "Adjusting
the Color and Other Image Settings" on page 90 for
instructions.
❏ Try selecting the following settings in the Configuration
window: Color Control, Continuous auto exposure , and
Recommended Value on the Color tab. See EPSON Scan
Help for details.
❏ Check the Brightness setting in EPSON Scan.
If you are scanning with the ADF, see "Adjusting the Color
and Other Image Settings" on page 58 for instructions.
If you are scanning from the document table, see "Adjusting
the Color and Other Image Settings" on page 90 for
instructions.
❏ Adjust the brightness using the Histogram in EPSON Scan’s
Professional Mode. See EPSON Scan Help for details.
❏ Check the brightness and contrast settings of your computer
monitor.
To Next Page
Loading...
