Epson L405 Series User Manual

Solving Problems
Checking the Printer Status
Checking the Error Indicators on the Printer
When an error occurs, the light turns on or ashes. Details of the error are displayed on the computer screen.
: On
: Flashing slowly
: Flashing fast
Light Situation Solutions
No paper is loaded or more than one sheet
has been fed at a time.
Load paper and press the
or button.
A paper jam has occurred.
Remove the paper and press the
or
button.
Initial ink charging may not be complete. See the Start Here poster to complete initial ink
charging.
The b light and B light ash alternately.
An ink pad is nearing or at the end of its
service life.
The ink pads need to be replaced.
Contact Epson or an authorised Epson service
provider to replace the ink pad*. It is not a user-
serviceable part.
When a message saying that you can continue
printing is displayed on the computer, press the
or button to continue printing. The
lights stop ashing for the time being, however, they
will continue to ash at regular intervals until the ink
pad is replaced.
A printer error has occurred. Open the scanner unit and remove any paper or
protective material inside the printer. Turn the power
o and on again.
If the error continues to occur after turning the power
o and on again, contact Epson support.
Wi-Fi connection error has occurred. Press the button to clear the error and try again.
User's Guide
Solving Problems
94

Epson L405 Series Specifications

General

Print Technology	On-demand inkjet (Piezo electric)
Print Resolution	5760 x 1440 dpi
Scanner Type	Flatbed color image scanner
Connectivity	USB 2.0
Ink Tank System	Yes
Functions	Print, Scan, Copy
Scan Resolution	1200 x 2400 dpi
Ink Bottle Capacity (Black)	70 ml
Dimensions (W x D x H)	482 x 300 x 145 mm
Print Speed (Black)	33 ppm
Print Speed (Color)	15 ppm
Copy Speed (Black)	7.7 cpm
Copy Speed (Color)	3.8 ipm
Paper Sizes	A4, A5, A6, B5
Ink Bottles	Black, Cyan, Magenta, Yellow
Ink Bottle Capacity (Color)	70 ml (each color)
Operating Systems	Windows XP/Vista/7/8/8.1/10, Mac OS X 10.6.8 or later