Epson l805 - Page 108

Light status Condition/solution
The ink pads need to be replaced. You must contact Epson for support.
The paper/cancel and
ink lights are flashing
alternately
The network status light is There is a network connection error. Hold down the network status
flashing slowly button to clear the error, then try to connect to the network again.
The paper did not eject because it is too small. Remove the paper by
The paper/cancel light is
flashing quickly hand or load a larger paper size. Press the paper/cancel button to
eject the paper.
The ink light is flashing The output tray is not in the correct position. Position the output tray for
quickly printing on paper or CD/DVD/Blu-ray and try again.
The paper/cancel light is
flashing slowly
The ink light is flashing The printer cover is open. Close the printer cover.
slowly
The paper/cancel light is
flashing slowly
There are packing materials inside your product. Open the printer cover
The power light is flashing
and remove any paper or protective materials inside the printer. Turn
quickly
the product off and then back on again.
The Wi-Fi light is flashing
quickly
The network status light is
flashing quickly
The ink light is flashing
quickly
The paper/cancel light is
flashing quickly
108