Parent topic: Solving Paper Problems
Related references
Paper Jam Problems in the Rear Paper Feed Slot
Paper Jam Problems in the Rear Paper Feed Slot
If paper has jammed in the rear paper feed slot, carefully remove the paper.
Parent topic: Solving Paper Problems
Related references
Paper Jam Problems Inside the Product
Paper Ejection Problems
If you have problems with paper ejecting properly, try these solutions:
• If paper does not eject fully, you may have set the wrong paper size. Cancel printing to eject the paper.
Select the correct paper size when you reprint.
• If paper is wrinkled when it ejects, it may be damp or too thin. Load new paper and be sure to select
the correct paper type setting when you reprint.
Parent topic: Solving Paper Problems
118