Refilling Ink
Periodically check the ink tanks to see if they need to be refilled.
Before checking the ink level or refilling an ink tank as described here, be sure to read the ink safety
precautions.
Caution: Visually check the ink levels in the product’s ink tanks to confirm the actual ink levels.
Continued use of the product when the ink is expended could damage the product.
Ink Safety Precautions
Check Ink Levels
Purchase Epson Ink
Refilling the Ink Tanks
Ink Safety Precautions
Note: The product has a low ink alert system. The accuracy of this system depends on the user refilling
the ink tanks correctly. The product cannot directly measure the ink levels in the tanks; instead it
estimates the amount of ink remaining by internally monitoring ink usage. The low ink alert system may
generate inaccurate messages if the ink tanks are not refilled according to these instructions.
As a precaution, perform regular visual inspections of the ink tanks to ensure ink levels do no fall below
the lower line. Continued use of the product when the ink level is below the lower line on the tank could
damage the product.
Ink Handling Precautions
• Keep ink bottles and the ink tank unit out of the reach of children. Do not allow children to drink from or
handle the ink bottles and bottle caps.
• Do not tilt or shake an ink bottle after removing its seal; otherwise, ink may leak.
• If ink gets on your skin, wash it thoroughly with soap and water. If ink gets into your eyes, flush them
immediately with water. If ink gets into your mouth, spit it out immediately.
Ink Refilling Precautions
• Use ink bottles with the correct part number for this product.
• The use of non-Epson ink may cause damage that is not covered by Epson’s warranty, and under
certain circumstances, may cause erratic product behavior.
78
To Next Page
Loading...
Need help?
General
Weight and Dimensions
