1-10
Setting Up the Printer
Sun-E+
Rev. C
A5 size Chap1.fm
4/15/99 Pass 0
L
Proof Sign-off:
<Crestec> _______
<Yamanouchi> _______
<Crestec> _______
9. Lift the ribbon guide of the ribbon cartridge (①) and insert it
firmly over the metal pins behind the print head (②). Make
sure the ribbon is not twisted or creased and that it is in place
behind the print head. Press down the guide until it clicks
into place.
10. Turn the ribbon-tightening knob in the direction of the arrow
to remove any slack in the ribbon as shown above. Then slide
the print head from side to side to make sure it moves
smoothly.
ribbon guide
ribbon-tightening
knob
1-6su.eps
1-7.eps
To Next Page
Loading...
