Epson LQ-2180 - Setting the Paper Thickness Lever

2
Printing on Continuous Paper
2-3
Sun-E+
Rev. C
A5 size Chap2.fm
4/15/99 Pass 0
R
Proof Sign-off:
<Crestec> _______
<Yamanouchi> _______
<Crestec> _______
Note:
You can load two different types of continuous paper onto the front and
rear push tractors, and easily switch between them using the paper
release lever. Before moving the paper release lever, always press the
Load/Eject
button to feed the paper in the paper path backward to the
standby position.
Setting the Paper Thickness Lever
Setting the paper thickness lever allows the printer to
accommodate various thicknesses of paper. The paper thickness
lever is located under the printer cover. You can select one of nine
positions identified by the scale next to the lever.
Pull tractor position
For loading continuous paper from the tractor installed
on top of the printer in the pull position. When the
tractor is in the pull position, you can load paper in the
front, rear, or bottom slot.
Paper release
lever position
Description
0
1
-
1
3
2
4
5
6
7
paper thickness
lever
2-5g.eps
2-38n.eps