Epson LQ-2180 - International Character Sets for the Italic Table

C-28
Specifications
Sun-E+
Rev. C
A5 size Appc EUL.fm
4/15/99 Pass 0
L
Proof Sign-off:
<Crestec> _______
<Yamanouchi> _______
<Crestec> _______
International character sets for the Italic table
You can select one of the following eight international character sets for the
Italic character table shown below using the default-setting mode or the ESC
R command. For example, when you select “Italic France,” the characters in
the “France” row are used in the Italic character table.
You can select one of the following seven additional sets only with the ESC
R command.