Epson LQ-2180 - Character Tables

C
Specifications
C-17
Sun-E+
Rev. C
A5 size Appc EUL.fm
4/15/99 Pass 0
R
Proof Sign-off:
<Crestec> _______
<Yamanouchi> _______
<Crestec> _______
Character Tables
You can select the character tables shown in this section using the printer’s
default-setting mode or with software commands.
Note:
❏
Most of the character tables are the same as the PC 437 table for hex codes 00
through 7F; for these tables, only the characters for hex codes 80 through FF
are shown.
❏
The character tables with an asterisk (*) after the table name are available only
in some countries.
PC 437 (US Standard Europe)