2-4
Printing on Continuous Paper
Sun-E+
Rev. C
A5 size Chap2.fm
4/15/99 Pass 0
L
Proof Sign-off:
<Crestec> _______
<Yamanouchi> _______
<Crestec> _______
Use the following table to set the paper thickness lever to match
the thickness of your paper.
Note:
❏
If the printed image is smeared, you may need to set the paper
thickness lever one position higher to improve print quality.
❏
If the printed image is faint or has many gaps, you may need to set
the paper thickness lever one position lower to improve print quality.
Paper type* Lever position
Ordinary (single sheets or continuous paper) 0
Thin paper -1 or 0
Carbonless multi-part forms with:
2 parts (original + 1 copy)
3 parts (original + 2 copies)
4 parts (original + 3 copies)
5 parts (original + 4 copies)
6 parts (original + 5 copies)
1
2
3
5
7
Continuous paper with labels 2
Envelopes 2 or 6
Postcards 2
* See Appendix C for complete paper specifications.
To Next Page
Loading...
