If the top or bottom edge of the characters in the self test are a
different color from the rest, adjust the ribbon angle with the
color ribbon adjustment lever. See page 3-12 for details.
Note
:
When you print using the color ribbon, print speed may be reduced.
To switch to the black ribbon, remove the color ribbon and then
install the black ribbon as shown on page 1-6. To remove the
color ribbon, press down on the motor unit and pull out the
cartridge as shown below. You do not have to remove the
motor unit.
2-29
2-30
L
Blackberry REV.D
A5 size Chapter 2
96/04/08 pass 1
2-38
Using the Printer
To Next Page
Loading...
