What to do if paper from another paper source is currently in the paper path of my Epson Printer?
If paper from another paper source is currently in the paper path of your Epson Printer, move the paper-release lever back to the appropriate position and press the Load/Eject button to clear the paper from the paper path. Then set the lever to the position you want to use. Press the Pause button to turn off the Pause light, if necessary.
Why my Epson LQ-300+ Printer is not feeding paper?
If the Epson Printer is not feeding paper, first remove any continuous paper that may be left in the printer. Then, set the paper-release lever to the single-sheet position and insert a new sheet. Also, try moving the paper a little to the left.
Why are there regular gaps in the printout of my Epson LQ-300+ Printer?
If regular gaps occur in the printout of your Epson Printer, one-inch skip-over-perforation may be set. Set skip-over-perforation to off in the Default Setting mode.
Why does printing start too high or too low on the page with my Epson LQ-300+ Printer?
If printing starts too high or too low on the page, or the bottom part of one page is printed at the top of the next page on your Epson Printer, your application software settings may be incorrect. Check the margin or top-of-form position setting in your application software.
Why does the font selected on the control panel of my Epson Printer not print?
If the font selected on the control panel of your Epson Printer does not print, your software may be overriding your control panel setting. Check the font setting in your application software.
Why are dots missing in random positions on my Epson LQ-300+?
If your Epson Printer has dots missing in random positions, there is either too much slack in the ribbon or the ribbon has come loose. Reinstall the ribbon cartridge.
What to do if the paper was not fed correctly in my Epson Printer?
If the paper was not fed correctly or is of the wrong type in your Epson Printer, turn off the printer and pull out the paper. Insert a new sheet straight into the paper guide, ensuring you’re using the right type of paper.
Why is the print on my Epson LQ-300+ Printer faint or uneven?
If the print on your Epson Printer is faint or uneven, the ribbon may be worn out. Replace the ribbon cartridge.
What to do if no paper is loaded in my Epson LQ-300+ Printer?
If no paper is loaded in the selected paper source of your Epson Printer, load paper in the printer. Then press the Pause button to turn off the Pause light, if necessary.
What to do if paper is jammed in my Epson LQ-300+ Printer?
If paper gets jammed in your Epson Printer, turn off the printer, open the printer cover, tear off the paper supply and turn the paper-feed knob to eject the remaining paper.
Explains how to enter and use the Micro Adjust mode.
Explains the conventions used for warnings, cautions, and notes in the guide.
Provides essential safety guidelines for printer operation.
Details electrical safety and grounding requirements.
Instructions on how to unpack the printer and its components.
Steps for connecting the printer to a power source.
Guide on how to install or replace the printer's ribbon cartridge.
Procedure for performing the printer's self-test.
Instructions for connecting the printer to a computer.
Guide to installing the printer driver and utility software.
Explains how to operate the printer using its control panel buttons.
Overview of the printer's default configuration options.
Steps to modify the printer's default settings via the control panel.
Instructions for loading and printing on continuous paper.
Guide to setting the starting print position on the page.
Instructions for loading and printing on single sheets of paper.
How to set the lever for different paper thicknesses.
Guide to using the printer driver in Windows Me, 98, and 95.
Steps to modify various printer driver settings.
Guide to using the printer driver in Windows 3.1.
Guide to using the printer driver in Windows 2000 and NT 4.0.
Guide to using the printer driver in Windows NT 3.5x.
How to diagnose printer problems using control panel lights and beeps.
General troubleshooting advice and common solutions for printer issues.
Troubleshooting steps for power-related issues.
Steps to resolve issues where the printer fails to print.
Troubleshooting for faint or uneven print quality.
Troubleshooting for incorrect print positioning on the page.
Steps to fix issues with single sheet paper feeding.
Troubleshooting for problems with continuous paper feeding.
Information on how to get technical assistance from EPSON.
General| Maximum print size | A4 (210 x 297 mm) |
|---|---|
| I/O ports | 1x IEEE1284 Bi-directional Parallel 1x Serial |
| Fonts included | Roman, Sans Serif, Roman T, Sans Serif H |
| Dimensions (WxDxH) | 366 x 275 x 159 mm |
| Media types supported | Cut sheet, Rolls |
| Recommended media weight | 52 - 82 g/m² |
| Standard interfaces | Parallel, Serial |
| Country of origin | Indonesia |
| Sound pressure level (printing) | 49 dB |
| Color | Yes |
| Built-in barcodes | Code 39, POSTNET, UPC-A, UPC-E |
| Maximum resolution | 360 x 360 DPI |
| Mean time between failures (MTBF) | 6000 h |
| Operating temperature (T-T) | 5 - 35 °C |
| Operating relative humidity (H-H) | 10 - 80 % |
| Sustainability certificates | ENERGY STAR |
| Pallet width | 1200 mm |
| Pallet height | 1000 mm |
| Pallet length (UK) | 2113 mm |
| Quantity per pallet | 42 pc(s) |
| Quantity per pallet (UK) | 54 pc(s) |
| Quantity per pallet layer | 4 pc(s) |
| Quantity per pallet layer (UK) | 6 pc(s) |
| Package depth | 447 mm |
| Package width | 363 mm |
| Package height | 217 mm |
| Package weight | 5800 g |
| Quantity per pack | 1 pc(s) |
To Next Page
