Epson LQ-780 - Page 34

7. Close the sprocket covers.
8. Position the left sprocket so that the sprocket pins are to the left of the arrow mark on the back
of the printer. Then push down the lock lever to lock the sprocket in place.
Note:
Printing starts at the arrow mark on the back of the printer.The unprintable area is to the left of
the arrow mark.
9. Slide the right sprocket to remove any slack in the paper. Then push down the sprocket lock
lever to lock the sprocket in place.
LQ-780/LQ-780N User’s Guide
Paper Handling 34