Epson LQ-800 - DIP Switch Panel; Interface Selection; Baud Rate Selection

Table 1. DIP switch panel 1
Switch No. Function
1-1
1-2
lnternational character set selection
1-3
1-4 Select input buffer capacity
1-5
Select printing style
1-6
1-7
1-8
Condensed characters
1 -inch skip-over-perforation
Cut sheet feeder mode
ON OFF
See Table 3
7KB
1KB
Draft
LQ
ON OFF
ON
OFF
ON
OFF
Table 2. DIP switch panel 2
Table 3. International DIP switch settings*
*There are five additional international character sets available through software
commands-Japan, Norway Denmark II, Spain II, and Latin America. See
Chapter 5 for additional information
Table 4. Interface selection
Table 5. Baud rate selection
Function 2-3 2-4
8-bit parallel interface OFF OFF
Serial interface, Even parity ON
OFF
Serial interface, Odd parity
OFF ON
Serial interface, Non parity ON ON
= Factory setting when delivered