Epson LQ-800 - Turning on the Power Switch

Plug in the printer’s power cord, making sure the outlet is properly
grounded. Turn the power ON with the switch on the left side of the
printer (see Figure 1-11).
Figure 1-11. Turning on the power switch
When the power is turned ON:
l The print head moves back and forth and stops at the left side of the
printer.
l The printer is initialized-any previous settings are erased, and the
printer is reset to its default (or preset) values. See Appendix I for a
list of default values.
l The three green lights on the control panel--POWER, READY, and
ON LINE-go on. (The red PAPER OUT light does not go on unless
the printer is out of paper.)
1-13