Epson LX-300 User Manual

2. Hold down the
FONT
button while you turn on the printer.
If you are using single sheets, insert a sheet of paper. The
printer automatically loads the paper and prints out a table
of languages from which you can choose. You can print
instructions in English, French, German, Italian, or Spanish,
as shown in Table A below.
Table A
FONT Lights
1 2 Language
O N
English
O F
French
N O
German
N N
Italian
N F
Spanish
F
= flashing,
N
= on,
O
= off
3. To choose a language, press the
FONT
button repeatedly until
the
FONT
lights match your desired selection. For example, to
choose Spanish, press the
FONT
button until
FONT 1
is on and
FONT 2
is flashing.
4. Press the
LF/FF
to select the language. The printer prints the
current settings in the language of your choice, and then stops.
5. Press the
FONT
button now to print help text that guides you
through the operations. (Once you are experienced with the
Printer Setting mode, you can skip this step by pressing
LF/FF
instead.) The printed instructions include submenu tables that
list all of the settings you can change and show you how the
control panel lights appear for each selection. After printing is
finished, go on to step 6.
6. At this point, you are in Table B. Press the
FONT
button to
move through the printer settings listed in Table B, and notice
how the control panel lights change to indicate your position.
L
Blueberry REV.F
A5 size Chapter 2
95/05/25
2-20
Using the Printer

Epson LX-300 Specifications

General

Print Method	9-pin impact dot matrix
Interface	Parallel
Paper Handling	Friction feed, tractor feed
Weight	4.4 kg
Operating Environment	Temperature: 5 - 35°C, Humidity: 10 - 80%