Epson LX-300 User Manual

2. Install the motor unit in the right hand corner of the printer,
with the gear facing the center of the printer. Push it down
firmly to fit the metal pins into the slots.
3. Insert the motor unit plug into the connector on the printer.
4. Slide the print head to the middle of the printer; then slide the
plastic part on the color ribbon to the center of the cartridge.
BB2-24
BB2-25
L
Blueberry REV.F
A5 size Chapter 2
95/05/25
2-32
Using the Printer

Epson LX-300 Specifications

General

Print Method	9-pin impact dot matrix
Interface	Parallel
Paper Handling	Friction feed, tractor feed
Weight	4.4 kg
Operating Environment	Temperature: 5 - 35°C, Humidity: 10 - 80%