5. Turn the ribbon-tightening knob in the direction of the arrow
to remove any slack in the ribbon.
6. Insert the ribbon cartridge into the printer as shown; then press
both sides of the cartridge firmly to fit the plastic hooks into
the printer slots.
7. Turn the ribbon-tightening knob to help feed the ribbon into
place; it should not be twisted or creased.
8. Replace the printer cover.
BB2-26
BB2-27
R
Blueberry REV.F
A5 size Chapter 2
95/05/25
Using the Printer
2-33
To Next Page
Loading...
