Epson LX-300+ Manual

Canna/Clover
booklet.fm RevC
A5-Format booklet.fm
5/10/01 Durchlauf 2
R
Proof-Abzeichnung:
ABE M. Miyagawa, Takahashi_______
Takahashi _______
ABE G. Kok _______
19
EN
3. From the File menu, choose Run. The Run dialog box appears. In the Command
Line box, type E:\START and click OK.
Note:
If your CD-ROM drive has a drive letter other than E , substitute the appropriate
letter.
The installation program starts. The subsequent procedure is menu-driven, i.e., you
can select the relevant options from a list simply by clicking with the mouse. The
remainder of the installation is automatic and you do not need to enter any more
information.
4. Select the desired options and follow the on-screen instructions.
5. After the printer software has been successfully installed, click on the button
identified by a door icon to exit the installation program.
The installation program automatically selects the LX-300+ as the default printer for
Windows applications.
❚ For DOS programs
To control the printer from DOS application programs, you need to select the printer
you are using or another available printer from the printer list of your application.
Choose the EPSON LX-300+/LX-1170 printer at the appropriate step in the setup or
installation procedure of your DOS application program. If the list in your application
does not include the LX-300+/LX-1170 printer, choose the first available printer from
this list.
For LX-300+
If you plan to use color, you must choose either LX-300+, LX-300, JX-80, or EX-800.
The other printers cannot use color.
LX-300
LX-810/850
LX-80/86
FX-850
FX-86e/800
JX-80
EX-800
Any FX printer
EPSON printer
Draft printer

Epson LX-300+ Specifications

General

Emulation	Epson ESC/P, IBM PPDS
Print Method	9-pin, impact dot matrix
Interface	Parallel
Paper Handling	Friction feed
Dimensions	366 x 275 x 159 mm
Paper Width	4 - 10 inches