Epson NX - Setting the Port Configuration; Network Server and Password Status; Setting the Network Server Mode; Setting the Password Security

Running the SETUP Program
Setting the Port Configuration
The I/O (input/output) port address options let you define the address for the following ports:
Primary parallel port
Primary and secondary serial ports.
The table below list the I/O address options for each port.
Table B-3
I/O address options.
Network Server and Password Status
The password status options let you define the password for the following:
cl
Network server mode
Cl
Password security
a
Password.
Setting the Network sewer mode
The network server’s default setting is Not installed. To install the network server
security mode change the setting to
Installed.
Setting the Password security
The default setting is Not installed. To install a password change the setting to
Installed.
B-10 Epson NX Service Manual