Error
Beep
Codes
Error Beep Codes
If the POD detects an error but cannot display an error message, the computer sounds an
error tone code. The tone code is a distinct pattern of beeps that identifies the error, such as
one long beep and two short beeps. If there are no errors, the system beeps once before it
loads the operating system.
Table 2-4 lists the error beep codes.
Table 2-4
Error Beep Codes
Replacement
of
these
components
is
performed
on
centers
outside
the
U.S.
by
authorized
service
Servicers
in
the
U.S.
should
replace
the
system
board
when
there
is
a
malfunction
of
any
of
the
components
marked
with
an
asterisk.
2-6
Epson
NX Service
Manual
To Next Page
Loading...
