Battery Connector
The battery connector (CNll) is a 2-pin, male header
connector,
accessible from inside the
computer and located on the system board Figure A-9 shows the connector and Table A-9
provides the pin assignments.
Reset Connector
The reset connector (CN12) is a 2-pin connector that has no posts and is in place for future
use. Figure A- 10 shows the connector and Table A-10 provides the pin assignments.
Figure A-10 Reset Connector
Table A-10
Reset Connector Pin Assignments
Epson
NX
Service
Manual
A-13
To Next Page
Loading...
