1. Make sure the carriage is in the home position at the front of the scanner.
If the carriage is not in the home position, connect the scanner to the computer with a USB cable to turn on
the scanner, and wait until the carriage moves to the home position.
2. Unplug the USB cable from the scanner.
3.
Attach the packing materials that came with the scanner, then repack the scanner in its original box or a
similar box that ts the scanner snugly.
c
Important:
❏ If the scanner is not repacked correctly, vibrations and shocks during transport may cause damage to the scanner.
❏ When transporting the scanner, avoid turning it upside down.
Related Information
& “Part Names and Functions” on page 11
Maintenance
>
Transporting the Scanner
50
To Next Page
Loading...
