❏ When you are using Document Mode in Epson ScanSmart, select Text Enhancement from Image Option on
the Advanced Settings tab on the scan settings screen.
❏ When Black & White is selected as the Image Type
Depending on the condition of your scanned image, click Settings and try setting a lower level for Edge
Enhancement or a higher level for Noise Reduction Level.
❏ If you are scanning in JPEG format, try changing the compression level.
In Epson ScanSmart, click
Settings, and then click the Save Settings tab > Options button.
Related Information
& “Image Adjustment Features for Document Mode” on page 36
& “Image Adjustment Features for Photo Mode” on page 41
Moiré Patterns (Web-Like Shadows) Appear
If the original is a printed document, moiré patterns (web-like shadows) may appear in the scanned image.
❏ When you are using Document Mode or Photo Mode in Epson ScanSmart, enable Descreening on the
Advanced Settings tab on the scan settings screen.
❏ When you are using Document Mode or Photo Mode in Epson ScanSmart, change the Resolution on the Main
Settings tab on the scan settings screen, and then scan again.
Related Information
& “Image Adjustment Features for Document Mode” on page 36
& “Image Adjustment Features for Photo Mode” on page 41
Cannot Scan the Correct Area
❏ Make sure the original is placed correctly against the arrow marks in the corners.
❏ Move the originals about 2.5 mm (0.1 in.) away from the horizontal and vertical edges of the scanner glass to
avoid cropping.
❏ Do not use the scanner stand, and place the base of the scanner directly on a
at,
stable surface.
❏ Depending on the the original, automatic cropping according to the size may not work correctly. Set the
original size manually using Document Mode in Epson ScanSmart.
Select
Settings > Scan Settings tab > Document Mode. Click Custom Settings, and then select the size of
the original in Main Settings > Document Size.
Solving Problems
>
Scanned Image Problems
>
Cannot Scan the Correct Area
54
To Next Page
Loading...
