Epson Perfection V39II - Image Adjustment Features for Photo Mode

e Settings for Output 2 screen is displayed when you select On or Settings. Change the settings
for the second scanned image (image 2).
Watermark (for Windows only)
You can add a watermark to the scanned image.
Select Settings to display the Water mar k Setting s screen.
Image Adjustment Features for Photo Mode
In Photo Mode, the scan settings screen opens when scanning. You can adjust scanned images using the features
on the Advanced Settings tab.
For Photo Mode, you can use image adjustment features that are suitable for photos or pictures.
For most features, you can check the adjustment results in the preview window.
Note:
❏ Some features cannot be set without previewing.
❏ Some items may not be available depending on other settings you made.
Brightness
You can adjust the brightness for the whole image.
Note:
is feature is not available depending on the settings on the Main Settings tab > Image Type or the settings
on the Advanced Settings tab.
Contrast
You can adjust the contrast for the whole image. If you increase the contrast, the bright areas become
brighter, and the dark areas become darker. On the other hand, if you lower the contrast, the
dierences between the bright and dark areas of the image are less dened.
Note:
is feature is not available depending on the settings on the Main Settings tab > Image Type or the settings
on the Advanced Settings tab.
Scanning > Advanced Scanning > Image Adjustment Features for Photo Mode
41